Rod for the safe damp discharge of cables or equipment under test up to 11k.
Rod for the safe damp discharge of cables or equipment under test up to 35kv.
The T&R DP20 probe has a maximum discharge voltage of 20kV.
The T&R DP40 probe has a maximum discharge voltage of 40kV.
The Clare B433R is a simple to use earth/ground bond tester with a 25A test current suited to manufacturing or laboratory environments.
The Clare Sentinel 200 from Seaward has been built to provide a cost effective, yet powerful solution to hipot testing, whether on a production line or in a laboratory environment for compliance testing.
The TOS5200 is designed for AC Hipot Test with 500 VA capacity and 200 mA short circuit current output capability.
The Metrohm E3640 is an AC flash tester for leakage and breakdown testing.
The Clare B255 comprehensive electrical safety tester is recognised as the industry standard and product of choice for the hire and service/repair industries.
The Clare SafeCheck 8 is a bench-mounted comprehensive tester, ideal for electrical safety testing in the hire, rental and service industries.
The Seaward Sentinel 500 has been built to provide a cost effective, yet powerful solution to hipot testing, whether on a production line or in a laboratory environment for compliance testing.
The Kikusui TOS5300 contains a PWM amp system which provides highly-stable output voltages up to 5kV/100mA.
The Clare STM/L has been designed to meet the needs of manufacturers that require a range of safety tests to be carried out on a variety of electrical and electronic products.
The Clare HAL 101 is a simple dielectric strength and DCIR tester, enabling one test point or product to be tested at any one time.
The rugged and portable C.A 6121 is a comprehensive tester for the EN 60204 machine directive, and covers all the measurements specified.
A single instrument for all testing: dielectrical testing, voltage drop and continuity testing, insulation resistance measurement, leakage current measurement, discharge time measurement and functional testing.
The Clare HAL 102 is a DCIR tester with 5 channel scanner, enabling up to 5 tests to be performed in sequence on either the same product or a group of products, without any need for human intervention.
The Sentinel 501 has been built to provide a cost effective, yet powerful solution to hipot testing, whether on a production line or in a laboratory environment for compliance testing.
The Clare SwitchSmart is an eight-channel switching matrix compatible with the Clare HAL104 and Clare HAL LED safety testers.
The T&R KV5-100 high voltage AC test system is supplied in a compact and portable case with permanently connected test leads.
Test instruments designed for testing insulation systems and the measurement of breakdown voltage on electrical plant and components.
Typical AC applications include testing of insulation systems and measurement of break down voltage of electrical plant and components.
High voltage DC instruments designed to perform tests on installed cables and jointing systems.
VLF Test Equipment is used to provide clear and reliable information on the cable condition.
A range of high specification industrial safety test and measurement equipment that combines innovation and high quality with consistent and reliable performance – even in the most demanding working environments.
We offer a range of accessories, depending upon the product and model. Below is a list of some of our more frequently requested product accessories. More are available, please refer to the literature you received with your product for more information, or alternative please contact us.