Established as a business in the UK in 2004, Kewtech has a heritage that goes back well into the twentieth century. The Kewtech Directors and many of the staff were originally part of Robin Electronics that was the UK market leader during the 1980s, 1990s and early 2000's.
Kewtech is owned and managed by the original founders and employs a team of more than twenty UK staff designing, developing, testing, marketing, selling, repairing and supporting Kewtech products throughout the UK.
Low cost AC DC Clamp Meter can measure up to 400 Amps AC/DC with data hold button.
The Kewtech Fuse Finder consists of a transmitter, receiver plus mains and fused test lead set. LEDs clearly indicate signal strength and an auto power off maximises battery life.
Protects the KEW6315 unit and allows magnetic attachment to apropriate locations for ease of use.
Power supply adapter for the Kyoritsu 6315 and 6310 power analysers.
The Kewtest FC2000 ensures that you keep your obligation of 'knowing that your test instruments are reading correctly at all times'.
The Kewtech KEW8031F phase indicator is designed to check the presence of open phase and phase sequence by rotating disk lamps.
The Kewtech KEWISO2 Safe Isolation Kit allows you to ensure your work complies with regulation 14 of the Electricity at Work Regulations.
Simple and effective current clamp adapter to enable you to measure up to 3000 Amps AC.
The KEW2056R is a True RMS digital 1000A, 600V ac/dc clamp meter.
Clamp sensor for the KEW6315 and 6310 power quality analysers.
The Kewtech KTD30 is a comprehensive Insulation / Continuity tester.
Straight forward high current clamp, no voltage measurement just a peek hold for inrush current.
Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones.
The Kewtech KT31 is a high quality analogue tester for the traditionalist who likes to see the swing of the needle.
The Kewtech KTD40 is capable of measuring true loop impedance, this gives more relevant information when testing PSC/PFC.
Tests electrical insulation at 3 test voltages: 250V, 500V & 1000V dc. The Kewtech KT35 test meter complies with BS7671.
The Kewtech KT56 RCD tester is traditional and reliable and tests type AC and type A RCD's.
The Kewtech KEW8112 is an AC clamp adaptor with 8mm jaw for use with digital multimeters and oscilloscopes.
Latest circuit design permits the KEW4105A to operate with a minimum of influence from ground voltage and ground resistance of auxiliary ground spikes.
Tests results are indicated by LEDs and the actual results are displayed on the screen - fast and easy feedback of test status.