- Hamilton01698 829711
- Leeds0113 235 1356
- Belfast02890 830302
Bicotest RL2000 Woodpecker Cable Identifier
Includes: RL2000 Receiver, Transmitter, headphones, test leads, soft case and calibration certificate.
The Bicotest Woodpecker RL2000 Cable Identifier is for use on dead HV cables. Its analogue meter shows signal strength and has constant or pulsed sine wave output.
The cable identifier is intended to work with loop impedances up to 80 ohms @ 625 Hz. Impedances in excess of this will reduce the loop current and hence the ease with which the identifying signal is detected.
The transmitter unit is designed to give a constant output current into any load up to the maximum impedance specified. All operations on the cable are only to be carried out after the cable has been isolated and earthed in accordance with an approved safe method of working.
FEATURES
High voltage dead cable identifier.
Identify HV cables from LV cables.
Receiver | |||
---|---|---|---|
Operating Frequency | 625 Hz | ||
Audio Indication | Internal loudspeaker. | ||
Visual Indication | Analogue meter showing signal strength. | ||
Battery State | LED battery level indication. | ||
Search Antenna | Screened high gain search coil. | ||
Filter | Switched capacitor type. | ||
Gain Control | Manual rotary 120dB (max). | ||
Battery | 1 x 9V PP3/6LR61. | ||
Headphones | 3.5mm jack, min. impedance 23 ohms. | ||
Weight | 2.8 Kg. | ||
Warranty | 1 year. | ||
Transmitter | |||
Operating Frequency | 625 Hz. | ||
Battery state | Red/green LED. | ||
Locate Range | Up to 15 Km. | ||
Signal | Constant or pulsed sine wave. | ||
Output Protection | Transformer isolate. | ||
Battery | 6 x 1.5V LR14 C cells. | ||
Maximum Power | 5W continuous/pulsed. | ||
Warranty | 1 years. |
No customer reviews for the moment.